HTV Self-Lubricating Silicone for Tubing, Grommets & Precision Seals
| ویژگی | مقدار معمول | توضیحات |
|---|---|---|
| پلیمر پایه | سیلیکون HTV (پختشونده در دمای بالا) | – |
| سطح روانکاری خودکار | در گریدهای مختلف موجود است | تنظیمشده بر اساس عملکرد مورد نیاز در کاربرد خاص |
| نشست فشاری | ۲.۵٪ (نمونهای) | ارزیابیشده پس از تغییر شکل طولانیمدت |
| سختی (Shore A) | ۴۰ تا ۸۰ | قابل سفارشیسازی متناسب با نیاز نهایی کاربرد |
| استحکام کششی | تا ۸ مگاپاسکال | حفظ استحکام ساختاری در شرایط تنش |
| ازدیاد طول تا پارگی | ۳۰۰٪ تا ۷۰۰٪ | نشاندهنده انعطافپذیری و قابلیت کشش بالا |
| رنگها | قابل سفارشیسازی | رنگهای استاندارد و خاص در دسترس |
| پایداری حرارتی | تا ۲۵۰ درجه سانتیگراد (استفاده مداوم) | مناسب برای کاربردهای دمای بالا |
| Property | WIC *** | Notes |
|---|---|---|
| Appearance/Colors | Customizable | Standard and special colors available |
| Temperature Range | Up to 250 °C (continuous use) | Thermal Stability, for high-temperature applications |
| Specific Gravity (CM3) | ||
| Compression set (22h/ 175°c) (%) | 2.5% (typical) | Evaluated after prolonged deformation |
| Hardness (Shore A) | 40–80 | Customizable based on end-use requirements |
| Tensile Strength (MPa) | Up to 8 MPa | Ensures structural integrity under stress |
| Tear Strength (N/mm) | ||
| Elongation at Break (%) | 300%–700% | Indicates flexibility and stretchability |
| Rebound resilience (%) | ||
| Volume resistivity (Q-cm) | ||
| Dielectric Strength (kV/mm) | ||
| Dielectric Constant (E2 50 HZ) | ||
| Dissipation factor (tan 6/1000 HZ) | ||
| Crosslinking agent | ||
| Curing conditions | ||
| Base Polymer | High-Temperature Vulcanizing (HTV) Silicone | - |
| Self-Lubrication Level | Available in various grades | Tailored for application-specific performance |
Features & Benefits
- Low surface friction for smooth motion
- High temperature and elasticity retention
- Strong dielectric strength under movement
- Superior wear resistance for longer life
- Custom-engineered grades available
Typical Applications
- Automotive: Low-friction seals, gaskets, connectors
- Medical Devices: Soft tubing, valves, comfort seals
- Electronics: Insulating and low-friction interfaces
- Industrial: Wear-resistant seals, low-maintenance parts
- Consumer Goods: Rollers, keypads, soft-touch components
Compliance & Quality
- Meets FDA and ISO 10993 standards –ensuring safety and reliability.
- ISO 9001 certified manufacturing
- Batch-tested for strength and durability
- Fully traceable batch documentation
ISO/TS 1694
ISO 9002
ISO 3808
ISO 9001
ISIRI 4267-2
ISO 17025
10993-5
10993-10
10993-4
Pharma
ASTM F756
Processing & Handling
- Designed for HTV compression, transfer, or injection molding; also suitable for extrusion of self-lubricating profiles.
- Recommended processing temperature range: 110–200 °C, depending on grade and part geometry.
- Pre-drying not required under normal storage conditions.
- Compatible with platinum- and peroxide-cure systems.
- Post-curing at 200 °C for 2–4 hours recommended for medical, food-contact, or high-performance parts.
- Ensure clean, properly vented molds to prevent air entrapment and surface defects.
Packaging & Storage
- Supplied in vacuum-sealed 20 kg cartons or custom packaging upon request.
- Store in a cool, dry place below 30 °C, away from sunlight and heat sources.
- Keep containers tightly closed to prevent contamination.
- Shelf life: 12 months under recommended storage conditions.
- Allow material to reach room temperature before use to ensure consistent processing.
HTV Self-Lubricating Silicone is a high-performance elastomer designed for applications requiring low friction and enhanced wear resistance. Engineered with self-lubricating properties, this silicone reduces friction without the need for external lubricants, ensuring long-term durability and reliability. Its excellent thermal stability, mechanical strength, and resistance to environmental factors make it ideal for demanding industrial and automotive applications.
The information contained herein is believed to be accurate. Users should verify the suitability of the product for their application. Wire Iran is not responsible for improper use.
Key Highlights
- Self-lubricating for reduced friction
- Stable strength across temperature extremes
- Excellent tear and tensile resistance
- Heat, abrasion, and weather resistant
- Electrically insulating for dynamic parts
- Custom hardness, color, and lubrication grades
Related Products
Transparent Silicone
High-clarity silicone engineered for transparency, aesthetics, and performance.
Medical & Food Grade Silicone
Formulated for industry standards, safe, durable, and ideal for medical and food contact.
HTV Silicone
High-performance and cost-effective material for diverse industrial applications.